
Corso Cisco INFND – Understanding Cisco Industrial IoT Networking Foundation
PANORAMICA

Contattaci ora per ricevere tutti i dettagli e per richiedere, senza alcun impegno, di parlare direttamente con uno dei nostri docenti CISCO CLICCA QUI.
Oppure chiamaci subito al nostro numero verde 800-177596.
OBIETTIVI DEL CORSO
Corso in End Of Life
Il corso Understanding Cisco Industrial IoT Networking Foundation (INFND) offre una panoramica dei protocolli, delle applicazioni e dell’infrastruttura di rete necessari per supportare e gestire le soluzioni IIoT (Industrial Internet of Things). Si conosceranno i pilastri fondamentali del settore IIoT e come vengano utilizzati i diversi protocolli in questo ambito. Il corso punta ad approfondire la conoscenza e l’implementazione di protocolli, soluzioni e tecnologie di rete in ambito Industriale. Tra questi si tratteranno: Cisco Industrial Ethernet Switches, i protocolli 802.11, IPV6, Map-T, Vlan, Wireless LAN Controller, WAN on IR829B, Connessioni LTE, Raw Socket TCP Tunnel, DNP3 e DNP3/IP Translation, QOS e MPLS per IIoT, VPN e VPLS, L2TPv3, DMVPNs, FlexVPN, Layer 2 e 3 Redundancy e altro ancora. Questo corso è fortemente orientato alla pratica su laboratori direttamente forniti da Cisco.
CONTENUTI DEL CORSO
Understanding Cisco Industrial IoT Networking Foundation (INFND)
Defining Industrial Internet of Things
- Defining IoT and Industrial IoT
- IIoT Examples
- IIoT Motivation and Standards
- IIoT Components
- Common IIoT Architecture
- IIoT Matching
Examining Common IIoT Verticals
- Major IIoT Verticals
- IIoT Manufacturing Vertical
- IIoT Mining Vertical
- IIoT Utilities Vertical
- IIoT Transportation Vertical
- IIoT Smart Cities Vertical
- IIoT Health Care Vertical
- IIoT Environment and Job Roles of OT and IT
- IIoT Common Verticals
Examining Cisco IIoT Networking Devices
- Overview of IIoT Networking Devices
- Cisco Industrial Routers
- Cisco Industrial Switches and Access Points
- Connect to the Cisco IIoT Devices
Examining and Configuring Industrial Communication Protocols
- IIoT Protocol Overview
- EtherNet/IP and CIP
- PROFINET
- Modbus and Modbus TCP
- DNP and DNP/IP
- IEC –, IEC –, and IEC –
- IEC , SMV, GOOSE, and MMS
- Industrial Protocol Use Cases
- Use Industrial Protocols with Cisco Industrial Ethernet Switches
Describing Wireless IIoT Protocols
- ISA and Wireless HART Protocols
- Protocols
- Configure a Client
- Zigbee
- Bluetooth and Bluetooth Low Energy Protocols
- Wireless IIoT Protocols
Explaining and Configuring TCP/IP Protocols, Addressing, and Segmentation
- TCP/IP Stack
- IIoT and TCP/IP
- IPv Addressing in an IIoT Environment
- IPv Addressing in an IIoT Environment
- Configure an IPv Address
- Using TCP/IP for IIoT Protocols
- Layer NAT, Layer NAT, and MAP-T
- Configure Layer NAT and IP Addressing in an Example IoT Deployment
- Configure and Verify MAP-T
- VLAN Concepts and Uses in IIoT
- Configuring and Verifying VLANs
- Implement VLANs
- VRF-Lite
- Configure IP Addressing, Layer NAT, and VLANs
Examining Network Services and Administration
- Time Protocols Overview
- Network Administration
- Use Network Administration Applications
Examining and Configuring Wireless Core LAN Technologies
- Standards and Configuration
- Configure Access Point and Wireless Network Using WLC
- Configuring Wireless Workgroup Bridging in IIoT
- Wireless Mesh Networks
- Autonomous and Unified Wireless
- Configure Wireless Networking
Describing Field WAN Technologies
- Field WAN Technologies
- Configure a WAN Interface on IRB
- IIoT over ADSL-SDSL, FHSS, G-G-G, and LTE
- Configure an LTE Connection
- IIoT over Serial Connections
- IIoT Field WAN Technologies Overview
Examining and Configuring Transportation of Legacy Protocols
- Supporting Legacy Protocols and Assets
- Tunneling over a Raw Socket TCP
- Configure Raw Socket TCP Tunnel
- Protocol Translation
- Configure DNP to DNP/IP Translation
- Tunneling Ethernet Non-IP Protocols (LTPv)
- Transportation of Legacy Protocols
Describing, Configuring, and Verifying QoS for IIoT Protocols
- QoS in an IIoT Deployment
- QoS Packet Marking
- Queuing
- SmartPort Macros
- Verifying QoS
- Life of a Packet and QoS
- Configure and Verify QoS for IIoT Networks
Examining and Verifying MPLS and IIoT
- MPLS Operations
- MPLS Services
- QoS Markings in MPLS
- Provisioning MPLS
- Configure and Verify MPLS for IIoT
Configuring and Explaining VPN Technology and IIoT
- VPN Usage in an IIoT Environment
- Layer VPNs in IIoT
- Configure and Verify VPLS VPNs
- Configure and Verify LTPv VPNs
- Layer VPNs in IIoT
- Configure and Explain VPN Technology and IIoT
- Dynamic Multipoint VPNs in IIoT
- Configure DMVPNs
- FlexVPNs in IIoT
- Configure FlexVPN
- Verify Connectivity for IIoT Devices over MPLS VPN Backbone
- Describing DWDM
- Dense Wave Division Multiplexing Overview
- DWDM Mechanisms and Bandwidth Considerations
- Use Cases for DWDM in an IIoT Environment
- DWDM
Configuring and Defining Layer and Layer High Availability Technologies
- Need for Layer and Layer Redundancy
- Spanning Tree Protocols
- Flex Links
- Resilient Ethernet Protocol
- Media Redundancy Protocol
- Parallel Redundancy Protocol
- Device Level Ring
- Configure Layer Redundancy
Defining and Configuring Layer High Availability Technologies
- Layer Redundancy in IIoT
- HSRP and VRRP
- BGP PIC
- Loop Free Alternate Fast Reroute
- Configure Layer Redundancy
Attività Laboratoriali
- Connect to the Cisco IIoT Devices
- Use Industrial Protocols with Cisco Industrial Ethernet Switches
- Configure an 802.11 Client
- Configure an IPv6 Address
- Configure Layer 2 Network Address Translation (NAT) and IP Addressing in an Example IoT Deployment
- Configure and Verify Mapping of Address and Port Using Translation (MAP-T)
- Implement VLANs
- Configure IP Addressing, Layer 2 NAT, and Virtual LANs (VLANs)
- Use Network Administration Applications
- Configure Access Point and Wireless Network Using Wireless LAN Controller (WLC)
- Configure Wireless Networking
- Configure a WAN Interface on IR829B
- Configure an Long- Term Evolution LTE Connection
- Configure Raw Socket TCP Tunnel
- Configure Distributed Network Protocol 3 (DNP3) to DNP3/IP Translation
- Configure and Verify QoS for IIoT Networks
- Configure and Verify MPLS for IIoT
- Configure and Verify Virtual Private LAN Service (VPLS) VPNs
- Configure and Verify Layer Two Tunneling Protocol v3 (L2TPv3) VPNs
- Configure and Explain VPN Technology and IIoT
- Configure Dynamic Multipoint VPNs (DMVPNs)
- Configure FlexVPN
- Verify Connectivity for IIoT Devices over MPLS VPN Backbone
- Configure Layer 2 Redundancy
- Configure Layer 3 Redundancy
TIPOLOGIA DEL CORSO
Corso di Formazione con Docente.
INFRASTRUTTURA LABORATORIALE
Per tutte le tipologie di erogazione, il Corsista può accedere alle attrezzature e ai sistemi reali Cisco presenti nei Nostri laboratori o direttamente presso i data center Cisco in modalità remota h24. Ogni partecipante dispone di un accesso per implementare le varie configurazioni avendo così un riscontro pratico e immediato della teoria affrontata.
Ecco di seguito alcune topologie di rete dei Laboratori Cisco Disponibili:


PREREQUISITI
Si consiglia la partecipazione al Corso Cisco CCNA.
DURATA E FREQUENZA
Durata 5gg;
Varie tipologie di Frequenza Estensiva ed Intensiva.
DOCENTI
I docenti sono Istruttori Ufficiali pluri certificati Cisco e in altre tecnologie IT, con anni di esperienza pratica nel settore e nella Formazione.
MODALITÀ DI ISCRIZIONE
Le iscrizioni sono a numero chiuso per garantire ai tutti i partecipanti un servizio eccellente.
L’iscrizione avviene richiedendo di essere contattati dal seguente Link, o contattando la sede al numero verde 800-177596 o inviando una richiesta all’email [email protected].
CALENDARIO
- Corso Cisco INFND (Formula Intensiva 5gg) – 12/12/2022 – 9:00 – 17:00